on all orders over $59
)
Just add wood， slide， and wood screws for a custom playset design. Doing it yourself has never been this easy! The Wrangler DIY swing set hardware kit by Swing-N-Slide features our best selling design features， including a tower and swing beam combo. This DIY play set hardware kit provides parents the most project flexibility and accessory options at a value-driven cost. This kit is a hardware only kit including two swing seats， swing hangers， ring/trapeze combo swing， ladder rungs， safety handles， and hardware necessary to build. Includes fully illustrated plans with different design configurations. Swing-N-Slide products are rated and tested for residential use only.
Features:
- Wood and slide NOT included; Just add wood and wood screws
- A cost-effective alternative to building a custom playset
- Easily customize by purchasing slide and accessories (sold separately)
- Play deck area totals 25 sq. ft. with 4 ft. deck heights
- Comes with two swing seats， one ring/trapeze combo swing and three pairs of swing hangers
- Minimum use zone: 29 ft. x 31 ft. for smallest optional design configuration
- Recommended for ages 2 to 10 years old
- Weight capacity of 900 lbs. based on maximum occupancy of 12 children
- Includes fully illustrated instructions， brackets， and hardware (requires lumber and slide， not included)
- Meets and/or exceeds ASTM safety standards for backyard residential use only
- For backyard residential use only; unable to ship to a commercial address
Required Lumber:
- (1) 2"x4"x8'
- (3)2"x4"x10'
- (4) 2"x4"x12'
- (3) 5/4"x6"x10'
- (8) 2"x6"x10'
- (2) 2"x6"x12'
- (7) 4"x4"x8'
- (1) 4"x6"x12' or (2) 2"x6"x12'
Required Tools:
- Circular Saw
- Electric Drill
- 1/2" Socket & Wrench
- Hammer
- Tape Measure & Square
- Safety Glasses and Dust Mask
- 1/8" & 5/16" drill bits (long)
- Phillips Bit
- 1-1/8" Spade Bit
- T-30 Torx Bit
Required Hardware:
- (3 lbs.) 2.5" wood screws
- (1 lb.) 2" screws
- (1 lb.) 1.25" screws
Comment